2 What ‘s the difference about 2 mode<\/p>\n It’s my personal\u00a0opinion that.Below 5X or 5X\u00a0\u00a0magnification,you can use from start to end mode.It’s quite\u00a0 intuitive.But if shoot in bigger\u00a0magnification,it will be better working in distance mode.Such as 20X for butterfly wing scales.You can move the rail forward to get close to the beginning point.Then set a distance to run.At the end of shooting,if you are not sure whether the distance is enough for the whole range,and you do not know what the last picture status is,you can simply press “shutter” to shoot one more picture to check.Also it’s better changing\u00a0parameters on the camera by cable or wireless instead of operating on the camera.<\/p>\n 3 When I should use lens support<\/p>\n The are two methods to support lens.Nylon blot and ring support. These\u00a0work\u00a0when you shoot in continuous light.They\u00a0can help to reduce the shake caused by the mirror.By using this method,you can reduce 3-5 seconds to stable \u00a0the picture.It can save a lot of time when a stack contain over 100 pictures.<\/p>\n![\"\"](\"http:\/\/www.wemacro.com\/wp-content\/uploads\/2017\/06\/vtoh.jpg\")
<\/a> ![\"\"](\"http:\/\/www.wemacro.com\/wp-content\/uploads\/2017\/06\/vs5.jpg\")
<\/a><\/p>\n